PAINT RED FAST DRY 5 GAL
Standard Fast Dry Waterborne 5 GAL RED 958204
A user friendly, high solids, fast drying waterborne traffic paint suitable for application by airless or air atomized equipment at film thicknesses between 10 and 30 mils. May be used to stripe roadways, airports and parking lots with or without pressure applied glass beads. It offers all of the benefits of a water reducible paint, and quickly dries to a no track condition. This paint meets TT-P-1952E Type III and matches the color standards outlined in the specification as noted above.
- Non-flammable and below 100 VOC•Product reduces and cleans up with water
- Performs equally well on both asphalt and concrete
- May be applied up to 30 wet mils thick
- Excellent bead retention with both standard and large beads
- Keeps traffic control to a minimum when striping
- Can be used for symbols, legends and lane marking
This paint is available in 5 gallon pails, 55 gallon drums and 275 gallon totes. Other packaging available on request.
Shelf life of the unopened product is one year from date of manufacture with proper storage and minimal agitation. Proper storage includes inside or covered, above 35°F (3°C), and out of direct sunlight. Outside storage for short intervals is acceptable.
Conditions for Application:
All surfaces must be clean, dry and free from oil, grease, antifreeze, loose sand, aggregate and chipping/peeling existing striping. Any curing compounds used on new concrete must be mechanically abraded off prior to striping. When striping on freshly sealed surfaces use caution as some sealers can affect the curing and adhesion of traffic paint. When in doubt, always test adhesion. For complete drying and minimum dirt retention when striping parking lots, the lots should be closed to traffic for two hours minimum after painting. New asphalt and concrete should be allowed to cure for a minimum of 14 days to maximize adhesion and durability.Coverage:1 gallon yields 320 feet of 4” stripe @ 15 mils; 400 feet of 4” stripe @ 12 mils.